When Boris visited pre-Covid, back in early February, we carried the old iron bathtub downstairs and threw it out the front door. There it rested until today, when I broke it up with a sledgehammer. It was quick work--about a quarter of an hour. However, I kept this piece, with some lettering on it. I can read "Port Hope" at the top, "MADE IN CANADA," and "8-55" at the bottom. The other two lines are difficult to make out. The third might read "5 FT," which was the actual length, and "F-20." Of the second line, I can almost make the end: "ERION," but that's just a guess.
Friday, 17 April 2020
Monday, 13 April 2020
The Sky's the Limit
Sunday, 12 April 2020
Easter Sunday
Friday, 10 April 2020
Easter
Wednesday, 1 April 2020
April Fool's Day
Monday, 16 March 2020
Landmark
We've known for years that there was something fishy about the beam that ran across the middle of the kitchen ceiling. When we rebuilt the back of the house, we realized that one end was supported by a pair of L brackets, one of which was lag-bolted into a truncated 2 by 7 stud that rested on a doorframe made of 3/4 inch pine!
We finally placed 6 by 6 posts under the beam.
This is (obviously) the chimney end. We had to demolish a section of the wall in the hallway opposite the bathroom to insert the other post--a bit of a step backward, but necessary. It was no joke threading this through the wiring. I had to lift it slightly above the beam and then drop it into place; the sill is slightly lower than the floor. Still--all's well that ends well!
We finally placed 6 by 6 posts under the beam.
This is (obviously) the chimney end. We had to demolish a section of the wall in the hallway opposite the bathroom to insert the other post--a bit of a step backward, but necessary. It was no joke threading this through the wiring. I had to lift it slightly above the beam and then drop it into place; the sill is slightly lower than the floor. Still--all's well that ends well!
Saturday, 14 March 2020
Beam Ends
We should not have been surprised, after finding, years ago, that one end had very little support, that the other had none. Revisiting the end of the beam hidden in the wall, I discovered some points I had missed originally. As on the kitchen end, the supports were metal brackets, one fairly solidly lag-bolted to an original post, but the other attached to stub of a stud which rested on an unheadered door casing: just a 3/4 inch piece of board. I placed a post under this, but above was a cradle of hardwood (which burned very well in the woodstove) which had tipped so much it carried no weight at all. On top of all of that, two ceilings intervened between the beam and the joists, so the whole bag of tricks was quite worthless. Now we're jacking the beam up with a piston jack directly under it. I'll then take the weight with another post/jack combo in front of the sink, with another below it in the cellar for temporary support. Then I'll ease a 6 by 6 into the position occupied by the present jackpost (after cutting away some obstructions). Easy peasy!
Subscribe to:
Posts (Atom)


